What is the difference between 1 file firmware and 5 files:
It is known that when you download any firmware for your Galaxy device from sites known to download the firmware such as Sammobile, the firmware contains one file where it updates the Android operating system without deleting anything and the file is used by the Odin Tool in box AP.
But there are firmware of another type are characterized by being more comprehensive and larger containing four files and they are BL-AP-CP-CSC-CSC HOME, They are called several labels: Repair Firmware-Full Firmware-Factory Firmware-Factory Roms,These files are flashed by the Odin tool in the following order BL=BL_A600N - AP=AP_A600N - CP=CP_A600N - CSC/CSC_Home=CSC_A600N.
CSC HOME: It is the file responsible for the languages of the device, but when used will not delete anything from the device (unformat).
What is the difference between CSC or CSC HOME:
CSC: It is the file responsible for the languages of the device but when used it will delete all files on the device (lost data).CSC HOME: It is the file responsible for the languages of the device, but when used will not delete anything from the device (unformat).
Firmware Link
- A600NKSU1ARL1 / OKR1ARL1 v8.0
- A600NKSU1BSD3 / OKR1BSD3 v9.0
- A600NKSU3BSJ2 / OKR3BSJ2 v9.0
- A600NKSU3CTD1 / OKR3CTD1 v10
- A600NKSU4CTG5 / OKR4CTG5 v10
- A600NKSS5CTI3 / OKR5CTI3 v10
- A600NKSU6CUA3 / OKR6CUA3 v10
- A600NKSU7CUI2 / OKR7CUI2 v10
- A600NKSU8CVC2 / OKR8CVC2 v10
How To Flash A600N
- Download and install Samsung Driver USB.
- Download the Odin tool 3.13 and then extract it.
- Download the Firmware and extract it.
- Download Pit file A600N depending on the problem of the device you have in case there are no problems in flashing do not use the file.
- Open odin tool And from the BL box we choose the file BL=BL / AP=AP / CP=CP / CSC=CSC or CSC_HOME, What is the difference between the two files explained at the top.
- Reboot Phone in Download Mode (press Volume Up for a short while and plug this cable into your smartphone , Let go of this button when you see a change on the screen).
- Connect the device to the computer and press Start.
- The process will take a few minutes so be patient and never disconnect the cable.
- After the flash is finished, the device will automatically restart.
- It will take about 10 minutes to boot the Android device so don't worry.
- After the boot process is finished, the Setup Wizard will appear.
- Complete the settings, Congratulations on successfully flashing the device.
You can always contact us in case you encounter any problems and we will be happy to answer you